| model | WTUPE-20T | WTUPE-40T | WTUPE-60T | WTUPE-80T | WTUPE-100T |
| Mould clamping force (T) | 20 | 40 | 60 | 80 | 100 |
| Mould opening force (T) | 5.7 | 8.1 | 10 | 11 | 12.5 |
| System pressure(MPA) | 14 | 14 | 14 | 14 | 14 |
| mould opening distance (mm) |
1000 | 1100 | 1500 | 1700 | 1700 |
| Die clamping gap (mm) | 400 | 400 | 600 | 600 | 600 |
| Die clamping travel (mm) | 600 | 700 | 900 | 1100 | 1100 |
| Mould column internal distance |
Left-to-right 650 Front-to-rear 450 |
Left-to-right800 Front-to-rear575 |
Left-to-right1200 Front-to-rear900 |
Left-to-right1500 Front-to-rear900 |
Left-to-right1600 Front-to-rear1000 |
| Ejection distance of ejecting cvlinder (mm |
0-100 | 0-100 | 0-100 | 0-100 | 0-100 |
| Acting force of ejecting cylinder (T) |
3 | 5 | 5 | 5 | 8 |
| Travel control mode | Encoder | Encoder | Encoder | Encoder | Encoder |
| Descending speed (mm/s) | 180 | 170 | 240 | 180 | 180 |
| Ascending speed (mm/s) | 160 | 100 | 170 | 140 | 140 |
| Cooling water interface | 3/4” | 3/4” | 3/4” | 3/4” | 3/4” |
| Motor power(Kw) | 7.5 | 7.5 | 11 | 11 | 15 |
| Weight of machine(T) | 2.5 | 4.5 | 10 | 13 | 16 |
| Machine outline dimensions (L*W*H)mm |
870×1100×3600 | 1115×1200×4200 (Excluding the dimension of maintenance platform) |
1450×2240×5300 (Excluding the dimension of maintenance platform) |
1450×2240×5800 (Excluding the dimension of maintenance platform |
1950*2550*6300 (Excluding the dimension of maintenance platform) |
Trim Pres
<
>
